Page 3
Cautions Upon receiving the scale, please take at least 8 hours to recharge the battery (refer to page 6) before you start to operate this scale. Please recharge the battery after a long period of storage (more than one month). It takes 8~10 hours to fully recharge the battery.
Page 4
Dimensions EQW - Weighing Scale User Manual...
Symbols on LCD Zero Symbol appears on the left-bottom corner of LCD, and indicates the scale is at zero-point. NET Weight Symbol appears on the bottom edge of LCD, and indicates the tare weight has been deducted. Battery Symbol ...
Page 6
Operation Instructions Backlight (optional) Press and hold key till the scale sounds beep to enable / disable the Backlight. Status of the Battery : When LCD indicates and the scale sounds - beep for four times, it means the battery is running in low-voltage status.
Page 7
UNIT: Select the weight mode: kg / pcs. Under (simple counting) mode: The suggested unit weight of the measured subject should be heavier than the division of this scale. 1. Put 100 pieces of the measured subject (with the same unit weight) on the platter.
Recharge the Battery Power off the scale and connect the power cord to an AC outlet. CHARGE LED: will indicate the ongoing status of the battery. It takes about 8~10 hours to fully recharge the battery. CHARGE LED: Color of LED Status of the battery Initial connection ORANGE...
Need help?
Do you have a question about the EQW Series and is the answer not in the manual?
Questions and answers