Advertisement
Quick Links
Advertisement
Related Manuals for Hocom GRP Series
Summary of Contents for Hocom GRP Series
- Page 1 User Manual Series GRP-Price Computing Scale User Manual Digital Pricing Scale...
- Page 2 Cautions Upon receiving the scale, please take at least 8 hours to recharge the battery before you start to operate this scale. Please recharge the battery after a long period of storage (more than one month). It takes 8~10 hours to fully recharge the battery.
- Page 3 Dimension GRP-Pricing Scale User Manual...
- Page 4 Symbols on LCD Zero Indication Cursor appears on the bottom edge of WEIGHT LCD (above of printed on the display-overlay), ZERO and indicates the scale is at zero-point. Tare Weight Indication Cursor appears on the bottom edge of WEIGHT ...
- Page 5 Battery Symbol - - When WEIGHT LCD indicates and the scale sounds beep for four times, it means the battery is running in low-voltage status. LCD will indicate - continuously for reminding the user to recharge the battery.
- Page 6 (1) Press this key to set the decimal point for the unit price. (2) Press and hold [ ] key till the scale sounds beep to enable or disable optional Backlight. Press this key to delete the setting of unit price. Users could key in the unit price directly without pressing [CE] key while the last transaction had been finished for more than 3 seconds.
- Page 7 TARE ZERO (1) Press this key to zero the weight that is lighter than the division. WEIGHT LCD will show cursor on the above of (printed on the ZERO display-overlay). (2) While the measured weight is heavier than the division, press this key could get a net weight.
- Page 8 MC : Press this key could delete all accumulated data in the memory bank (the s cale will sound beep beep when [MC] key has been operated). Press this key to operate the multiplication. Example: Key in 25 » Press [ ] key »...
- Page 9 Operations: (1) Put the apples on the platter and key in the unit price: 45, and then press [M+] key to save the total price in to the memory bank, LCDs will show: 90.00 ; then press [CE] key could go back to normal operating mode.
-
Page 10: Recharge The Battery
(4) Press [CHANGE] key once and then key in 500, LCDs will show: 190.00 C310.00 ; then press [CE] key could go back to normal operating mode. (5) Press [MC] key to delete all accumulated data in the memory bank. Recharge the Battery Power off the scale and connect the power cord to an AC outlet. -
Page 11: Installation Procedure
Installation Diagram of Bench List of Components: Item <1> Indicator <2> Regulator <3> Stainless Steel Tube <4> Tube Base <5> Stainless Steel Platter <6> Main Structure <7> Cable of Load Cell <8> Connector Installation Procedure: A. Screw <4>Tube Base and <6>Main Structure together (with 2 screws of Tube Base). - Page 12 Digital Pricing Scale We do more than you expect...
Need help?
Do you have a question about the GRP Series and is the answer not in the manual?
Questions and answers