Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Hocom SSW Series
Summary of Contents for Hocom SSW Series
- Page 1 User Manual Series SSW - Weighing Scale User Manual DIGITAL WEIGHING SCALE...
- Page 2 Cautions Upon receiving the scale, please take at least 8 hours to recharge the battery before you start to operate this scale. Please recharge the battery after a long period of storage (more than one month). It takes 8~10 hours to fully recharge the battery.
- Page 3 Dimensions SSW - Weighing Scale User Manual...
-
Page 4: Symbols On Lcd
Symbols on LCD Zero Symbol appears on the left-bottom corner of LCD, and indicates the scale is at zero-point. NET Weight Symbol appears on the bottom edge of LCD, and indicates the tare weight has been deducted. Battery Symbol ... - Page 5 Operation Instructions Backlight (optional) Press and hold key till the scale sounds beep to enable / disable the Backlight. UNIT: Select the weight mode: kg / pcs. Under (simple counting) mode: The suggested unit weight of the measured subject should be heavier than the division of this scale.
- Page 6 Press this key to make the scale be at zero point. LCD will indicate O on the left-bottom corner. Press this key to deduct the tare weight. Put the package or container on the platter and then press [TARE] key.
- Page 7 RS232 Interface Connection: <optional device> SCALE 5 4 3 2 1 5 4 3 2 1 DATA OUT 9 8 7 6 9 8 7 6 RS232 Wiring Configuration: Baud Rate: 9600 Parity: None Stop Bit: 1 Data Bit: 8 SSW - Weighing Scale User Manual...
-
Page 8: Recharge The Battery
Recharge the Battery Power off the scale and connect the power cord to an AC outlet. CHARGE LED will indicate the ongoing status of the battery. It takes about 8~10 hours to fully recharge the battery. CHARGE LED: Color of LED Status of the battery Initial connection ORANGE... -
Page 9: Installation Procedure
Installation Diagram of Bench Scale List of Components: Item <1> Indicator <2> Regulator <3> Stainless Steel Tube <4> Tube Base <5> Stainless Steel Platter <6> Main Structure <7> Cable of Load Cell <8> Connector Installation Procedure: A. Screw <4>Tube Base and <6>Main Structure together (with 2 screws of Tube Base). - Page 10 DIGITAL WEIGHING SCALE We do more than you expect SSW - Weighing Scale User Manual...
Need help?
Do you have a question about the SSW Series and is the answer not in the manual?
Questions and answers