Advertisement
Advertisement
Table of Contents
Related Manuals for Hocom FW Series
Summary of Contents for Hocom FW Series
- Page 1 User Manual Series Series Digital Weighing Scale...
- Page 3 Cautions When LCD shows ----- and the scale sounds beep beep beep, it means OVERLOAD. Please remove the measured objects away from the platter immediately. Please assemble the platter before powering on the scale, especially for the scale under 3kg max capacity.
- Page 4 Calibration Instructions Please power off the scale before operating the following procedures. 1. Press [ON/OFF] key once and then press key and do not release your finger for 5 seconds. Then LCD shows 7.3. 2. Press [UNIT] key and do not release your fingers for 3 seconds till LCD shows Setup.
- Page 5 Operation Instructions Backlight (optional) The optional Backlight will be enabled automatically after the scale has been powered on. Press key for 3 seconds to disable Backlight. ON/OFF ON/OFF Please press the key on the panel to turn on this scale. ...
- Page 6 Recharge the Battery When LCD indicates , the battery is in low-voltage condition. Please recharge the - battery as soon as possible. Please power off the scale and connect the power cord to an AC outlet. CHARGE LED will indicate the ongoing status of the battery. It takes about 8~10 hours to fully recharge the battery.
- Page 8 Digital Weighing Scale We do more than you expect...
Need help?
Do you have a question about the FW Series and is the answer not in the manual?
Questions and answers