Related Manuals for Hocom SDW Series
Summary of Contents for Hocom SDW Series
- Page 1 User Manual Series Digital Weighing Scales User’s DIGITAL WEIGHING SCALE Manua...
- Page 2 Cautions Upon receiving the scale, please take at least 8 hours to recharge the battery before you start to operate this scale. Please recharge the battery after a long period of storage (more than one month). It takes 8~10 hours to fully recharge the battery.
- Page 3 Dimensions Tabletop: Indicator: 300mm 160mm 150mm 140mm SDW - Weighing Scale User Manual...
-
Page 4: Symbols On Lcd
Symbols on LCD Zero Symbol appears on the left-bottom corner of LCD, and indicates the scale is at zero-point. Indication of Weighing Range () : cursor appears on the bottom edge of WEIGHT LCD (above of W1 or printed on the display-overlay), and indicates the present weighing range to be Weighing Range 1 (W1) or Weighing... - Page 5 Operation Instructions Backlight (optional) Press and hold key till the scale sounds beep to enable / disable the Backlight. Status of the Battery : When LCD indicates and the scale sounds - beep beep beep every thirty-minute, it means the battery is running in low-voltage status.
-
Page 6: Print (Optional)
UNIT: Select the weight mode: kg / pcs. Press this key to make the scale be at zero point. LCD will indicate O on the left-bottom corner. Press this key to deduct the tare weight. Put the package or container on the platter and then press [TARE] key. - Page 7 Under (simple counting) mode: The suggested unit weight of the measured subject should be heavier than the division of this scale. 1. Put 100 pieces of the measured subject (with the same unit weight) on the platter. 2. Press and hold [UNIT] key till LCD shows S= 10, and then quickly (within 3 seconds) press [UNIT] key again to select S=100 (10、20、50、100 could be selected for the sample-quantity of the...
- Page 8 RS232 Interface Connection: <optional device> 5 4 3 2 1 5 4 3 2 1 9 8 7 6 9 8 7 6 RS232 Wiring Configuration: Baurate: 9600 Parity: None Stop Bit: 1 Data Bit: 8 SDW - Weighing Scale User Manual...
-
Page 9: Recharge The Battery
Recharge the Battery Power off the scale and connect the power cord to an AC outlet. CHARGE LED will indicate the ongoing status of the battery. It takes about 8~10 hours to fully recharge the battery. CHARGE LED: Color of LED Status of the battery Initial Connection ORANGE... - Page 10 DIGITAL WEIGHING SCALE We do more than you expect SDW - Weighing Scale User Manual...
Need help?
Do you have a question about the SDW Series and is the answer not in the manual?
Questions and answers