Page 1
Edificio Genebre. Av. de Joan Carles I, 46-48 08908 L'Hospitalet de Llobregat. Barcelona (Spain) genebre@genebre.es - www.genebre.es INSTALLATION, OPERATION AND MAINTENANCE MANUAL “V” control ball valve, direct mount Flanged ends Ref. GENEBRE: 2528V GENEBRE S.A. FECHA DE REVISIÓN: 02/09/2020 NUMERO DE REVISIÓN: 0...
Edificio Genebre. Av. de Joan Carles I, 46-48 08908 L'Hospitalet de Llobregat. Barcelona (Spain) genebre@genebre.es - www.genebre.es Installation, operation and maintenance instructions 1. Products description ..................3 Atex Technical data ………………………………………………………. 3 2. Transport and Storage conditions ............. 3 3. Valve Breakdown ..................4 4.
- www.genebre.es 1. Product description. Genebre, S.A. offers a wide range of ball valves (90º turn), designed and assembled to handle and drive fluids in industrial procedures. The compatibility of materials used to build the valves (see technical specifications) and the application of valves to the different industrial processes is at user's risk.
- www.genebre.es If you notice any kind of anomaly during reception of the goods, contact immediately with GENEBRE in order to determine the possible responsibilities on the issue. IMPORTANT NOTE: Before installing and/or manipulating these elements READ CAREFULLY the enclosed instructions for use and OBSERVE all contained information.
Page 5
Edificio Genebre. Av. de Joan Carles I, 46-48 08908 L'Hospitalet de Llobregat. Barcelona (Spain) genebre@genebre.es - www.genebre.es Surface Spare Nº Name Material Treatment Part Code Body Stainless Steel 1.4408 Shot blasting ------ Stainless Steel 1.4408 Shot blasting ------ Ball Stainless Steel 1.4408...
Edificio Genebre. Av. de Joan Carles I, 46-48 08908 L'Hospitalet de Llobregat. Barcelona (Spain) genebre@genebre.es - www.genebre.es 4. Installation instructions 4.0) ATEX Installation These ball valves are suitable to be set up in explosive atmospheres: Zones 1 and 2 according to IEC 60079-10-1...
Edificio Genebre. Av. de Joan Carles I, 46-48 08908 L'Hospitalet de Llobregat. Barcelona (Spain) genebre@genebre.es - www.genebre.es Use the corresponding screws in all of the flanges drill holes. Place an adequate joint in each end and align it in the centre of the flanges.
(opened or closed). 5.3) Remote operation When automation of ball valves is required, GENEBRE S.A. can provide a great variety of pneumatic actuators, electric actuators, electropneumatic and electronic positioners to cover a large range of operations.
Edificio Genebre. Av. de Joan Carles I, 46-48 08908 L'Hospitalet de Llobregat. Barcelona (Spain) genebre@genebre.es - www.genebre.es It is responsibility of the user to establish a plan of inspection and maintenance of these apparatuses with the purpose of guaranteeing its safe use.
Regarding to the reparation of the equipment, it is advised to follow the requirements of the standard UNE-EN 60079-19. ¡Use only original spare parts or recommended by GENEBRE, SA! Before disassembling the pipe's valve to repair or replace it, make sure that line...
Page 11
Edificio Genebre. Av. de Joan Carles I, 46-48 08908 L'Hospitalet de Llobregat. Barcelona (Spain) genebre@genebre.es - www.genebre.es Remember that the STEM has a line in the frontal part to indicate position of the valve: parallel to the pipe means open; perpendicular means closed.
Edificio Genebre. Av. de Joan Carles I, 46-48 08908 L'Hospitalet de Llobregat. Barcelona (Spain) genebre@genebre.es - www.genebre.es 7.2) Rebuilding (assembling of the valve) Before proceeding to reassemble the valve, make sure that reparation kit and/or pieces to be used are appropriate and original from the factory.
Edificio Genebre. Av. de Joan Carles I, 46-48 08908 L'Hospitalet de Llobregat. Barcelona (Spain) genebre@genebre.es - www.genebre.es (These values are the recommended values by screws manufacturers, in our case we have considered using them in cal. 8.8) 9. Hygiene and Safety Instructions: 9.1) Fluids that go through a valve can be corrosive, toxic, flammable or pollutant.
Need help?
Do you have a question about the 2528V and is the answer not in the manual?
Questions and answers