Vankyo 495W User Manual page 14

Tip:
To activate screen mirroring function of your MacBook, please follow the below steps:
• Turn on the WiFi switch on your Android device.
Note:
Successful WiFi connection is not a must, but please make sure the WiFi switch on your
Android device is ON.
Go to Homepage > Input Source, select MULTISCEEN as the input source to
•
enter the CAST interface.
Select Miracast to enter the following interface.
•
Activate Multi-screen function on your Android device and search for the
•
projector.
Select LEISURE-495W-XXXX from the searching list to connect.
•
The contents on your Android device will be mirrored to the wall/screen after a
•
successful connection.
For Windows 10 System
To activate this function, your Windows 10 device must support the Miracast feature.
• Turn on the WiFi switch on Windows 10 device.
Note:
Successful WiFi connection is not a must, but please make sure the WiFi switch on your
Windows 10 device.
Go to Homepage > Input Source, select MULTISCEEN as the input source to
•
enter the CAST interface.
Select Windows Cast to enter following interface.
•
14