Advertisement
Installation Instruction
The prerequisite for the Operations console cable (feature number 0367) is the 2721
or 2745 card. If you need to install a 2721 or 2745 card, install it first, then return to
these instructions.
Ensure that your AS/400 Operating System is V4R3M0 or later.
Note: To verify, enter DSPPTF on the AS/400 Main menu. Look at the line Release of
This instruction only sets up a console that is directly connected to your AS/400.
This feature is customer installed. It will take approximately 1 hour to install the
hardware. However, you may elect not to perform this feature installation yourself.
You may contact IBM or an Authorized Dealer to make arrangements for them to
perform the feature installation for a fee.
You need to allow additional time to complete your jobs, back up your system, IPL
your system, and verify your hardware configuration.
Note: When you install the Operations Console cable (Feature 0367) and the
If there are incorrect, missing or visibly damaged parts, contact one of the
following:
v Your authorized dealer
v Point of purchase (for example, IBM Direct)
v IBM Rochester Manufacturing Automated Information Line (R-MAIL)
Determine if there are any existing prerequisites before you install your new
feature. Go to this Web site and locate your feature number and OS/400 release
and check the prerequisites.
http://as400service.ibm.com/s_dir/slkbase.NSF/
Then do the following to get to the Customer Install Features Prerequisites:
1. Select All Documents
2. Select Collapse
3. Select General Information
4. Select Offerings
5. Select Feature Prerequisites
6. Select Customer Install Features Prerequisites
Before You Begin
Ensure that your AS/400 Operating System is at V4R3M0 or later.
© Copyright IBM Corp. 1998, 2000
base option.
Remote Control Panel cable (Feature 0381), you may receive instructions for
each feature. The instructions are identical; use only one set of instructions.
– 1-800-300-8751 (United States)
– 1-507-253-5242 (worldwide)
1
Advertisement
