Advertisement
__ 5. Open the Modems icon, to verify your modem connection.
__ 6. Did the Install New Modem display appear?
__ 7. Is there an entry AS/400 Operations Console Connection?
__ 8. Click on Add.
__ 9. To install a null modem, do the following:
10
AS/400e 170 or 250 0367 Operations Console and 0381 Remote Control Panel Cable V4R5
text, open AS/400 Operations Console. Click on Help. Select Help
Topics. Select Obtaining and Installing Dial-Up Networking 1.2. When
the installation is complete, return to step 1 on page 9 and follow the
steps.
Click on Cancel.
No
Yes
↓
Go to step 9.
Note: Since Windows 95 does not support dial-in connections from remote
PCs (RCSs), there is no need for a regular modem. If one is
configured and you will not be using it for any other purpose, it can
be removed now.
No
Yes
↓
Click on OK. Go to "Windows 95 Local Controlling System (LCS)"
on page 11.
__ a. Check the box Don't detect my modem; I will select it from a list.. Click
on Next.
__ b. Click on Have disk.
__ c. Click on Browse.
__ d. If "Locate File" dialog message appears indicating A:\ is not
accessible, click on Cancel.
__ e. In the "Drives" section, select the drive where you installed Client
Access.
__ f. In the "Folders" section, open the folder that Client Access was
installed into. The default was "Program Files", then "IBM", then
"Client Access".
__ g. Double-click on Aoc.
__ h. Double-click on Inf.
__ i. Click on OK or Open.
__ j. Click on OK.
The AS/400 Operations Console Connection should be shown.
__ k. Click on Next.
__ l. Select the communications port that you installed the Console cable
into (for example, Com1).
__ m. Click on Next.
__ n. Click on Next.
Note: The first time a modem is configured on a PC, a display will
appear asking you for your telephone area code or country
code and any numbers necessary to access an outside line. If
you get this display, add the information, then click on Next to
exit that online display and continue with the next step.
__ o. Click on Finish.
Advertisement
