Advertisement
__ 11. Find EZ-Setup for AS/400e servers, SK3T-3025-04 CD-ROM. Insert the CD
__ 12. Find the CD-ROM for installing the console (PC) emulator and insert it
__ 13. Did the PC begin to read the information and automatically start the setup
__ 14. Click on Start.
__ 15. Click on Run
__ 16. Enter: d:\setup (where d is the CD-ROM drive letter)
__ 17. Follow the instructions on the windows.
__ 18. The wizard prompts you to choose the type of installation that you want.
__ 19. On the Component Selection window, ensure at minimum that the
__ 20. Follow the instructions on the windows that are presented to you until the
__ 21. Are you using the Windows 95 platform?
8
AS/400e 170 or 250 0367 Operations Console and 0381 Remote Control Panel Cable V4R5
↓
Go to step 12.
Go to step 11.
into the drive of your PC you intend to use as your Operations Console
PC.
a. Click Exit when the EZ-Setup for AS/400 window appears.
b. Click Start.
c. Click Run.
d. Type x:\ca400\setup in the Open text box (where x is the optical
CD-ROM drive).
e. Go to step 17 on page 8.
into the appropriate drive.
The V3R2M0 "AS/400 Client Access for Windows Family" or "AS/400
Operations Navigator" CD-ROMs contain the AS/400 Operations Console
support for Windows 95/NT.
There are other media you could use; for example, diskettes or a network
(LAN) drive. For information on these other media, go to Operations
Console Setup, SC41-5508-01 or Client Access Express for Windows - Setup,
SC41-5507-01 books.
program?
No
Yes
↓
Go to step 18.
The Setup window appears after a few seconds.
To continue with the setup program, select Next.
Follow the instructions on the display. Select Custom.
following components are selected:
v Base Support
v 5250 Display and Printer Emulator
v AS/400 Operations Console
Note: You need a 5250 emulator. It can either be the 5250 Display and
Printer Emulator or IBM Personal Communications V4.1 or later.
Click on Next.
setup is complete. For more information on installing, go to the Client
Access for Windows 95/NT - Setup book.
Click Yes or Finish, if prompted to restart.
Advertisement
