Figure 3. Where to Connect Operations Console and Remote Control Panel Cables
__ 15. Connect the other end of the cable to the first serial port on your PC that
__ 16. Do you have a Remote Control Panel cable to connect?
__ 17. Label the cable MI port.
__ 18. Connect the cable B to the connector (Figure 3) that is labeled MI on the
__ 19. Connect the other end of the cable to an available serial port on your
__ 20. Do you have any adapter cards or devices to install?
__ 21. Install the system unit back cover
__ 22. Plug the AS/400 system unit into an electrical outlet.
6
AS/400e 170 or 250 0367 Operations Console and 0381 Remote Control Panel Cable V4R5
you are using as your system unit console.
Note: If the cable does not correctly match the connector on the personal
computer, you may use a 9-to-25 pin adapter, part number 46G0298.
Yes
No
↓
Go to step 20.
back of your system unit.
system unit console (PC).
Note: If the cable does not correctly match the connector on the personal
computer, you may use a 9-to-25 pin adapter, part number 46G0298.
No
Yes
↓
Go to the instructions that came with that device. You need to
return to these instructions and go to step 21.