Advertisement
__ 20. Did you get the display prompting you for a Dedicated Service Tools (DST)
__ 21. Sign on the DST display.
__ 22. Select Work with DST environment.
__ 23. Select System devices.
__ 24. Select Console mode.
__ 25. Select Operations Console.
__ 26. Press PF3.
__ 27. Select Start a service tool.
__ 28. Select Operator Panel functions.
__ 29. Press PF10 to confirm the power down.
__ 30. Wait for the power light to turn off.
__ 31. Go to "Completing the Installation" on page 20.
Installing Windows NT Console Support
__ 1. To determine if you have Remote Access Service (RAS) installed, click on:
__ 2. Did the Install New Modem window appear?
__ 3. Is AS/400 Operations Console Connection listed?
__ 4. Click on Add.
__ 5. Checkoff the box Don't detect my modem; I will select it from a list..... Then
14
AS/400e 170 or 250 0367 Operations Console and 0381 Remote Control Panel Cable V4R5
Press the Up or Down select push button to select a 21 in the data window.
Press the enter button.
user id and password?
Yes
No
↓
Recheck the cables and Operations Console setup. Then return to
step 19 on page 13.
In the User field, type QSECOFR.
In the Password field, type QSECOFR.
Press the Enter key.
__ a. Start
__ b. Settings
__ c. Control Panel
__ d. Modems
No
Yes
↓
Go to step 5.
No
Yes
↓
Click on Cancel or Close. Then go to step 7 on page 15.
click on Next.
__ a. Click on Have disk.
__ b. Type the following:
C:\Programs Files\IBM\Client Access\Aoc\Inf
Press the Enter key.
__ c. Click on OK. The entry AS/400 Operations Console Connection
should be shown.
__ d. Click on Next.
Advertisement
