Download  Print this page

Connecting Up; Making Cable Connections; Audio Cables (Analog); Coaxial And Optical Digital Audio Cables - Pioneer SX-316-S Operating Instructions Manual

Pioneer operating instructions audio multi-channel receiver sx-316-s
Hide thumbs

Advertisement

Connecting up

Chapter 02:
Connecting up

Making cable connections

Make sure not to bend the cables over the top
of this unit. If this happens, the magnetic field
produced by the transformers in this unit may
cause a humming noise from the speakers.
Important
• Before making or changing any
connections, switch off the power and
disconnect the power cable from the AC
outlet.
• Before unplugging the power cord, switch
the power into standby.

Audio cables (analog)

Use audio cables (not supplied) to connect
audio components.
Connect red plugs to R (right) jacks, white
plugs to L (left).
Be sure to insert completely.
Coaxial and Optical digital audio
cables
Coaxial digital audio cables (standard video
cables can also be used) or optical cables are
used to connect digital components to this
receiver.
Be sure to insert completely.
Coaxial digital audio cable
(or standard video cable)
• When inserting the plug of an optical
cable, be careful not to damage the shutter
protecting the optical jack.
• Do not bend optical cables around sharp
corners as they may be damaged. When
storing, coil loosely.
02
Optical cable
En
7

Hide quick links:

Advertisement

loading

  Also See for Pioneer SX-316-S

  Related Manuals for Pioneer SX-316-S