Pioneer SX-316-S Operating Instructions Manual page 15

Controls and displays
2 DIGITAL
Lights when a Dolby Digital
signal is detected.
ANALOG
Lights when an analog signal is detected.
DTS
Lights when a DTS
is detected.
2
Lights to indicate decoding of a DTS
multichannel signal.
3 2 DIGITAL
Lights to indicate decoding of a Dolby Digital
multichannel signal.
4 2 PRO LOGIC II
Lights to indicate Pro Logic II decoding (see
Listening in surround sound on page 19 for
more on this).
5 VIR. SB
Lights during Virtual surround back
processing (page 21).
6 DIRECT
Lights when source direct playback is in use.
Direct playback bypasses the tone controls for
the most accurate reproduction of a source.
7 AUTO SURR.
Lights when the Auto Surround feature is
switched on (see Auto playback on page 19).
8 ATT
Lights when ANALOG ATT is used to
attenuate (reduce) the level of the analog input
signal.
9 SLEEP
Lights when the receiver is in sleep mode.
Note
1 Manufactured under license from Dolby Laboratories. "Dolby", "Pro Logic", and the double-D symbol are trademarks of Dolby
Laboratories.
2 "DTS" and "DTS 96/24" are trademarks of Digital Theater Systems, Inc.
1
encoded
2
encoded audio signal
10 Tuner indicators
/ MONO
Lights when the mono mode is set using
the MPX button.
/ STEREO
Lights when a stereo FM broadcast is being
received in auto stereo mode.
/ TUNED
Lights when a broadcast is being received.
11 Speaker indicator
Shows if the speaker system is on or not. SP A
means the speakers are switched on. SP
means the headphones are connected.
12 Character display
13 ADV.SURR. (Advanced Surround)
Lights when one of the Advanced Surround
modes has been selected.
14 WMA9 Pro
Lights to indicate decoding of a WMA9 Pro
signal.
15 MIDNIGHT
Lights during Midnight listening.
16 D.E.
Lights when Dialog Enhancement ( DIALOG E )
is switched on.
17 LOUDNESS
Lights during Loudness listening.
18 Master volume level
Shows the overall volume level. ---dB indicates
the minimum level, and - 0 dB indicates the
maximum level.
03
15
En