Controls and displays
Switches between the various surround
Switches between direct and stereo
playback. Direct playback bypasses the
tone controls for the most accurate
reproduction of a source (page 21). Also
selects the Auto Surround mode (Auto
playback on page 19).
Switches the receiver between standby and on.
12 PHONES jack
Dims or brightens the display.
14 ANALOG ATT
Attenuates (lowers) the level of an analog input
signal to prevent distortion.
These features give you good sound at low
volume levels when listening to movie
(Midnight) or music (Loudness) sources. Press
to switch between MIDNIGHT, LOUDNESS,
Lights to indicate the type of input signal
assigned for the current component:
Press to change the amount of time before the
receiver switches into standby (30 min – 60
min – 90 min – Off).
Mutes/unmutes the sound.
18 TUNER EDIT
Press to memorize and name a station for
recall (page 25).
Press this button to access the bass and treble
controls, which you can then adjust with the
MULTI JOG dial.
20 QUICK SETUP
See Using the Quick Setup on page 6.
21 System Setup menu controls
Press to access the System Setup menu
Confirm and exit the current menu screen.
8 9 10
Lights when the DVD/LD, DVR or CD
function is selected.