Controls and displays
Mutes/unmutes the sound.
Press to access commands in a rectangle
(above the buttons) on the remote. These
buttons are marked with an asterisk(* ) in this
Press to change the amount of time before
the receiver switches into standby (30 min
– 60 min – 90 min – Off).
Dims or brightens the display.
Attenuates (lowers) the level of an analog
input signal to prevent distortion.
INPUT SELECTOR buttons
Press to select an input source (press
DVD/DVR to use the DVD player/recorder
controls on the remote).
Use to switch to the receiver controls on
the remote control. Also used when setting
up the surround sound for the receiver
Displays the disc menu of DVD-Video
This feature localizes dialog in the center
channel to make it stand out from other
background sounds in a TV or movie
Confirm and exit the current menu screen.
ONE TOUCH COPY*
Copies the currently playing title from DVD
to HDD or vice-versa.
12 DVD/DVR control buttons
You can use these buttons to control a Pioneer
DVD player or recorder connected to your
system (press DVD/DVR to access the below
What it does
Turns DVD player or DVD recorder
Changes the audio language or
SUBTITLE Displays/changes the subtitles on
multilingual DVD-Video discs.
Starts/resumes normal playback.
Pauses/unpauses a disc.
Press to start fast reverse scanning.
Press to start fast forward scanning.
Skips to the start of the current
track or chapter, then previous
Skips to the next track or chapter.
Switch between the hard disk and DVD
controls for DVD/HDD recorders.
Displays the guides on a DVD
Accesses the timer recording menu.
Displays additional EPG information.
JUKEBOX* Switches to the Jukebox feature.
Press to access the SETUP menu .