Connecting Other Digital Components; Connecting Antennas; Fm Wire Antenna - Pioneer SX-316-S Operating Instructions Manual

Connecting up
Note
• You can only record from analog audio
sources (TV/SAT, CD-R/TAPE/MD,
FRONT AUDIO or FM/AM inputs). Audio
from the digital inputs is not recordable
from the analog outputs.
Connecting other digital
components
The diagram below shows the connections for
a digital video component (another DVD
recorder, digital satellite receiver, decoder,
cable box, etc.). Connect the digital audio
output of the component to the DVR input on
this receiver. Connect the video output from
the component directly to a spare video input
on your TV.
TV
DVD recorder etc.
FM UNBAL
Ω
75
OPT
CD
DIGITAL IN
TV /
IN
COAX SAT
PLAY
DVR
CD-R
COAX / TAPE
IN
/ MD
DVD/LD
REC
OUT
AUDIO L
VIDEO
IN
VIDEO DIGITAL
OUT OUT COAX
AM
ANTENNA
LOOP
FRONT SURROUND
S R L R L
P
E
A
K
E
R
S
Note
• If your digital component only has an
optical digital output, you can still connect
it to this receiver using the CD OPT optical
digital jack. If you choose to do so, you will
have to select the CD input function when
you want to hear playback from your digital
component.

Connecting antennas

Connect the AM loop antenna and the FM wire
antenna as shown below. To improve reception
and sound quality, connect external antennas
(see Using external antennas below). Always
make sure that the receiver is switched off and
unplugged from the wall outlet before making
or changing any connections.
FM wire
antenna
CD
DIGITAL IN

FM wire antenna

Connect the FM wire antenna and fully extend
along a window frame or another suitable
place that gives good reception.
AM loop
antenna
FM UNBAL AM
Ω ANTENNA
75 LOOP
OPT
TV /
COAX IN
SAT
PLAY
DVR
CD-R
COAX IN / TAPE
/ MD
DVD/LD
REC
OUT
AUDIO L
02
9
En