Safety Instructions
SAFETY, CONTROL, AND INSTRUCTION DECALS
if any are missing, illegible, or damaged, a replacement should be ordered and installed before
putting the machine into operation. The Decal Part Number is listed below and in the Parts Manual.
Location: Each End of Mower Deck
Part Number: 8600-28
1.
Warning – thrown object hazard.
●
Keep bystanders away from the machine
when operating.
●
Clear lawn of debris before operating.
●
Keep any discharge deflector in place and
in the lowest position.
2.
Warning – rotating mower blades are a cutting/
dismemberment hazard to hands and feet.
●
Keep all body parts away from rotating
mower blades.
●
Do not step on end of deck.
Location: Deck Carrier Frame
Part Number: 8600-14
Warning – do not operate the machine with the
deck tilted up.
Location: Chassis Member Behind Transaxles
Part Number: 9804-1
Neutral Lock
●
Lift and move back to engage step to unlock
transmission and allow machine to freewheel.
14
Safety, Control, and Instruction Decals are installed on the machine;
1.
2.
8600-28
8600-14
Location: Engine Brace
Part Number: 8600-12
Warning – carbon monoxide (CO) poisoning hazard.
●
CO emitted by a running engine can be deadly.
●
Do not operate indoors or in other enclosed
areas.
Location: PTO Guard on Deck
Part Number: 8746-2
Grease PTO shaft joints every 8 hours.
Location: Deck Discharge Shield (DS61)
Part Number: 5848-3
Warning – thrown object hazard.
●
Always keep the discharge shield in the lowest
position when operating.
●
Do not remove the discharge shield.
H24d
8600-12
8746-2