Page 2
LH ...Left Hand (orientated with operator on seat) LP...Low Profile mm (Dimension)... millimeters MS (Fastener) ...Machine Screw NS (as part number)... Item is not sold by Walker Manufacturing OD... Outside Diameter oz..ounce PFH (Fastener) ... Phillips Flat Head P/N ... Part Number PPH (Fastener) ...
Service Part Only May be ordered as a factory-installed option or as a kit for dealer installation. Contact your Walker dealer. NOTE: When installing Item # 8 on decks prior to S/N DX-62875, the swivel hook end should be attached to the deck carrier frame.
F020 F012 F020 F084 F226 EA SE Refer to DSD36 DECK ASSEMBLY, Page 8 F166 F117 F014 F317 EA SE Refer to DGHS36 DECK ASSEMBLY, Page 6 Refer to LUBRICATION POINTS, Page 58. ® Use only genuine Walker replacement parts.
Hardware Used on Heavy Duty Gearboxes F038 Refer to 36 INCH CARRIER FRAME ASSEMBLY, Page 4 F076 F124 Refer to FASTENER LOCTITE APPLICATION & TORQUE INSTRUCTIONS, Page 60. Refer to LUBRICATION POINTS, Page 58. ® Use only genuine Walker replacement parts.
3/16 x 1 Split Spring Pin F335 3/8-16 x 7/8 Set Screw, SS F336 3/8-16 Jam Nut Service Part Only May be ordered as a factory-installed option or as a kit for dealer installation. Contact your Walker dealer. REQ’D Effective Date 08-01-08...
Page 13
F336 F335 F317 F317 F123 F226 F084 F020 F012 F020 F084 F226 E A S F166 F117 F014 F317 F317 Refer to DML36 DECK ASSEMBLY, Page 12 Refer to LUBRICATION POINTS, Page 58. ® Use only genuine Walker replacement parts.
Service Part Only May be ordered as a factory-installed option or as a kit for dealer installation. Contact your Walker dealer. NOTE: When installing Item # 8 on decks prior to S/N DX-62875, the swivel hook end should be attached to the deck carrier frame.
F020 F084 F226 F012 EA SE Refer to DSD42 DECK ASSEMBLY, Page 18 F166 F117 F335 F014 F317 EA SE Refer to DGHS42 DECK ASSEMBLY, Page 16 Refer to LUBRICATION POINTS, Page 58. ® Use only genuine Walker replacement parts.
Service Part Only May be ordered as a factory-installed option or as a kit for dealer installation. Contact your Walker dealer. NOTE: The 48 Inch Carrier Frame is also used on the DML42A Mulching Deck (5707-1) and DML42B Mulching Deck (5707-2).
3/16 x 1 Split Spring Pin F335 3/8-16 x 7/8 Set Screw, SS F336 3/8-16 Jam Nut Service Part Only May be ordered as a factory-installed option or as a kit for dealer installation. Contact your Walker dealer. REQ’D Effective Date 08-01-08...
F012 Effective Date 08-01-08 F317 F084 F020 F020 F084 F226 E A S F166 F336 F335 F117 F014 F317 Refer to DGHS52 DECK ASSEMBLY, Page 32 Refer to LUBRICATION POINTS, Page 58. ® Use only genuine Walker replacement parts. F317...
Mulching Kit (For DSD52 Deck Assembly) Includes Items # 1-7, fasteners listed and instructions. May be ordered as a factory-installed option or as a kit for dealer installa- tion. Contact your Walker dealer. Refer also to DSD52 DECK ASSEMBLY, page 36. 8691-4...
Service Part Only May be ordered as a factory-installed option or as a kit for dealer installation. Contact your Walker Dealer. NOTE: When installing Item # 8 on decks prior to S/N DX-62875, the swivel hook end should be attached to the deck carrier frame.
Page 43
F068 F098 F055 F047 F012 Effective Date 08-01-08 F317 F336 F335 F317 F123 E A S F166 F117 F014 Refer to DSD56 DECK ASSEMBLY, Page 42 Refer to LUBRICATION POINTS, Page 58. ® Use only genuine Walker replacement parts. F317...
Blade Hub & Trash Guard 5706-26 Blade Hub, 36, 56 & 74 5705-30 Break Away Blade 5705-17 Special Bolt (1/2-13 x 1-7/16) ® Use only genuine Walker replacement parts. ITEM PART DESCRIPTION REQ’D Refer to DSD56 EA SE DECK ASSEMBLY,...
Sprocket, RH (973) 8640-9 Compression Spring (2-3/4) 8640-10 Extension Spring (1 x 5-3/8) (42" Carrier Frame) 8640-16 Roll Pin (8 x 20mm) ® Use only genuine Walker replacement parts. DECK HEIGHT ADJUSTER KIT ITEM PART REQ’D 8641 8642-2 8641-12 8640-2...
Refer to DSD52 DECK ASSEMBLY, Page 36 Effective Date 08-01-08 DECK HEIGHT ADJUSTER KIT EA SE Refer to DGHS42 DECK ASSEMBLY, Page 16 ® Use only genuine Walker replacement parts.
Torque P/N F018 (5/8-18 Hex Nut, used on underside of blades) to 60 ft-lb (81.4 N m). DO NOT apply Loctite · ® Use only genuine Walker replacement parts. ® APPLICATION & TORQUE INSTRUCTIONS ITEM DSD52 & DSD62 Deck Assemblies...
Page 63
Effective Date 08-01-08 ® APPLICATION & TORQUE INSTRUCTIONS Refer to Gear Drive Components (GHS and SD Models) EA SE 5846 Refer to Heavy Duty Gear Drive Components (GHS, SD, DML42A and DML42B Models) ® Use only genuine Walker replacement parts.
1/4" Quick Link 2744-5 Chain ® Use only genuine Walker replacement parts. ITEM PART DESCRIPTION REQ’D NOTE: Installation of 2430-10 on the Walker Model MBSSD allows the use of the following decks: DSD48 DSD52 DSD56 DSD62 DSD74 REQ’D Effective Date 08-01-08...
Page 65
MBSSD DECK ARM ADAPTER KIT (P/N 2430-10) To Tilt-Up Latch (Used in Tilt-Up Position) To Tilt-Up Hook (Used in Tilt-Up Position) ® Effective Date 08-01-08 Use only genuine Walker replacement parts.
Using the DSD74 Deck with Model MT-23 is not recommended in all conditions. In certain conditions (tall, wet grass), the performance of the deck may be marginal due to a limit of horsepower with the 23-hp engine. DSD Decks that are compatible with the Walker Super B using Kit # 2430-10 (Deck Arm Adapter Kit). ®...
(1) year* after date of sale to the original retail purchaser unless the product is used for rental purposes, in which case this warranty is limited to ninety (90) days. At Walker's request, customer will make the defec- tive part available for inspection by Walker and/or return the defective part to Walker, transportation charges prepaid.