Safety, Control, And Instruction Decals - Walker B27i Operator's Manual

Safety Instructions

SAFETY, CONTROL, AND INSTRUCTION DECALS

if any are missing, illegible, or damaged, a replacement should be ordered and installed before
putting the machine into operation. The Decal Part Number is listed below and in the Parts Manual.
Location: Each End of Mower Deck
Part Number: 8600-28
1. Warning – thrown object hazard.
● Keep bystanders away from the machine
when operating.
● Clear lawn of debris before operating.
● Keep any discharge deflector in place and
in the lowest position.
2. Warning – rotating mower blades are a cutting/
dismemberment hazard to hands and feet.
● Keep all body parts away from rotating
mower blades.
● Do not step on end of deck.
Location: Deck Carrier Frame
Part Number: 8600-14
Warning – do not operate the machine with the
deck tilted up.
Location: Chassis Member Behind Transaxles
Part Number: 9804-1
Neutral Lock
● Lift and move into slot to unlock transmission
and allow machine to freewheel.
16
Safety, Control, and Instruction Decals are installed on the machine;
1.
2.
8600-28
8600-14
Location: Flex Coupler Guard in Front of Engine
Part Number: 8600-2
Warning – entanglement and cutting and/or
dismemberment hazards.
● Keep away from rotating shafts, belts, and
other components.
Location: Deck Carrier Frame
Part Number: 8600-15
Warning – lock deck tilt-up hinge before operating
the machine.
Location: Deck Discharge Shield
(SD Decks Only)
Part Number: 5848-3
Warning – thrown object hazard.
● Always keep the discharge shield in the lowest
position when operating.
● Do not remove the discharge shield
B27i
8600-2
5848-3