Safety, Control, And Instruction Decals - Walker H37i Operator's Manual

Safety Instructions

SAFETY, CONTROL, AND INSTRUCTION DECALS

if any are missing, illegible, or damaged, a replacement should be ordered and installed before
putting the machine into operation. The Decal Part Number is listed below and in the Parts Manual.
Location: Each End of Mower Deck
Part Number: 8600-28
1. Warning – thrown object hazard.
● Keep bystanders away from the machine
when operating.
● Clear lawn of debris before operating.
● Keep any discharge deflector in place and
in the lowest position.
2. Warning – rotating mower blades are a cutting/
dismemberment hazard to hands and feet.
● Keep all body parts away from rotating
mower blades.
● Do not step on end of deck.
Location: Deck Carrier Frame
Part Number: 8600-14
Warning – do not operate the machine with the
deck tilted up.
Location: Chassis Member Behind Transaxles
Part Number: 9804-1
Neutral Lock
● Lift and move back to engage step to unlock
transmission and allow machine to freewheel.
Location: Underside of Rear Body, Behind Seat
Part Number: 5855
14
Safety, Control, and Instruction Decals are installed on the machine;
1.
2.
8600-28
8600-14
Location: Engine Shroud, LH Side
Part Number: 8600-12
Warning – carbon monoxide (CO) poisoning hazard.
● CO emitted by a running engine can be deadly.
● Do not operate indoors or in other enclosed
areas.
Location: Adjacent to Left Fuel Tank
Part Number: 2010-16
Fuel tank selector valve.
Location: PTO Guard on Deck
Part Number: 8746-2
Grease PTO shaft joints every 8 hours.
Location: Deck Carrier Frame
Part Number: 8600-15
Warning – lock deck tilt-up hinge before operating
the machine.
Location: Rear Body Near Muffler
Part Number: 8600-5
Warning – hot surface, do not touch.
H37i
8600-12
8746-2
8600-5