Safety, Control, And Instruction Decals - Walker T27i Operator's Manual

T27i

SAFETY, CONTROL, AND INSTRUCTION DECALS

if any are missing, illegible, or damaged, a replacement should be ordered and installed before
putting the machine into operation. The Decal Part Number is listed below and in the Parts Manual.
Location: Adjacent to Blower Discharge
Chute through Body
Part Number: 8600-4
1. Warning - rotating impeller is a cutting/dismem-
berment hazard to fingers and hands.
● Never reach down into the blower
discharge chute.
2. Warning - thrown object hazard.
● Never engage the PTO with grass catcher
raised.
Location: Engine Shroud
Part Number: 5855
Location: Rear Cross Member of Front Body
Part Number: 8600-16
Important - Lower front body before lowering
catcher box.
Location: Rear of Grass Catcher Exhaust Screen
Part Number: 5869
Safety, Control, and Instruction Decals are installed on the machine;
1.
2.
8600-4
8600-16
1. 2.
Location: RH Fender
Part Number: 8600-33
1. Warning – read Operator's Manual before
servicing or performing maintenance.
● Engage parking brake.
● Remove ignition key.
2. Forward Speed Control
● Move lever forward to increase speed; back
to stop.
3. Warning – do not operate the machine without
a deck or other implement attached.
4. PTO Clutch Lever
● Move lever forward to disengage PTO
clutch; back to engage.
5. Warning – do not engage PTO clutch with PTO
shaft disconnected.
Safety Instructions
1.
2.
3.
4.
5.
15