Operating; Safety, Control, And Instruction Decals - Walker Mowers Operator's Manual

Safety Instructions

SAFETY, CONTROL, AND INSTRUCTION DECALS

if any are missing, illegible, or damaged, a replacement should be ordered and installed before
putting the machine into operation. The Decal Part Number is listed below and in the Parts Manual.
Location: Each End of Mower Deck
Part Number: 8600-28
1. Warning – thrown object hazard
• Keep bystanders away from the machine
when operating.
• Clear lawn of debris before operating.
• Keep any discharge deflector in place and in
the lowest position.
2. Warning – rotating mower blades are a cutting/
dismemberment hazard to hands and feet.
• Keep all body parts away from rotating mow-
er blades.
• Do not step on end of deck.
Location: Deck Carrier Frame
Part Number: 8600-14
1. Warning – do not operate the machine with the
deck tilted up.
Location: Chassis Member Behind Transaxles
Part Number: 9804-1
1. Neutral Lock
• Lift and move into slot to unlock transmis-
sion and allow machine to freewheel.
14
Safety, Control, and Instruction Decals are installed on the machine;
8600-28
1.
8600-14
1.
1.
Location: Engine
Part Number: 8600-12
2.
1. Warning – carbon monoxide (CO) poisoning
hazard
• CO emitted by a running engine can be
deadly.
• Do not operate indoors or in other enclosed
areas.
Location: Deck Carrier Frame
Part Number: 8600-15
1. Warning – lock deck tilt-up hinge before operat-
ing the machine.
Location: PTO Guard on Deck
Part Number: 8746-2
1. Grease PTO shaft joints every 8 hours.
Location: Rear Body Near Muffler
Part Number: 8600-5
1. Warning – hot surface, do not touch
1.
8600-12
1.
1.
8746-2
1.
8600-5