Part Names And Functions - Panasonic GA-AS10T Installation Manual

2

Part Names and Functions

Front panel
Back panel
Power port
 Power port
Connect the supplied power cord to this port and connect the other end into an
electric outlet.
 Power cord hook block
If the supplied power cord is hanged to this block, the cord becomes hard to pull
out from the power port.
 Ground terminal
Connect the ground cable (AWG18: green/yellow) to the ground terminal screw.
 10BASE-T/100BASE-TX/1000BASE-T port (ports 1–12)
Connect 10BASE-T/100BASE-TX/1000BASE-T terminals, hubs, repeaters, bridges,
and Ethernet Switches.
Install the device so that the length of the twisted pair cables (CAT5e or above) will
be 100 m or less.
10
10BASE-T/100BASE-TX/1000BASE-T port
MAC Address label
Ground terminal Serial number label
Power cord hook block