Mounting To Rack - Panasonic GA-AS10T Installation Manual

3.2 Mounting to rack

Use the two 19-inch rack mount brackets and eight screws (for fixing the rack mount brackets
to the Ethernet Switch) supplied with the mount brackets PN71051 (optional) to fix the mount
brackets to the four holes on each side of the Ethernet Switch. Then securely install the Ethernet
Switch onto the rack using the four screws (for a 19-inch rack mount) supplied with the mount
brackets PN71051 (optional) or the screws supplied with the rack.
Up to two Ethernet Switches can be connected. When connecting two Ethernet Switches and
installing them onto a rack, use the two 19-inch rack mount brackets and eight screws (for fixing
the rack mount brackets to the Ethernet Switch) supplied with the mount brackets PN71052
(optional) to fix the mount brackets to the four holes on one side of the Ethernet Switches. Then
use the two connection brackets and eight screws (for fixing the connection brackets) supplied
with the mount brackets P71052 to securely fix the connection brackets to the connection
screw holes on the front and back panels, and then install the Ethernet Switches onto the rack.
Right side
Left side
Front
Connection screw hole
 Installation on a rack (one unit)
 Installation on a rack (two coupled units)
19-inch rack mount brackets
Screw holes for fixing the 19-inch rack mount brackets
19-inch rack mount brackets
Connection brackets
Connection screw hole
19-inch rack mount brackets
Back
Front
Front
Back
13