Panasonic GA-AS10T Installation Manual page 4

 Do not install this Ethernet Switch at the location with continuous vibration or
strong shock, or at the unstable location.
Deviation could lead to falling, injury and/or equipment failure.
 Do not put this Ethernet Switch into fire.
Deviation could lead to explosion and/or fire.
 Use the bundled power cord (AC 100 – 240 V specifications).
Deviation could lead to electric shock, malfunction, and/or equipment failure.
 Unplug the power cord in case of equipment failure.
Deviation, such as keep connecting for a long time, could lead to fire.
 Connect this Ethernet Switch to ground.
Otherwise this might cause electrical shocks, misoperations and malfunctions.
Connect the Ethernet Switch via the supplied power cord to the outlet which is
connected to the ground.
If the outlet is not connected to a ground, connect the ground cable (AWG18:
green/yellow) to the ground terminal screw.
 Connect the power cord firmly to the power port.
Deviation could lead to electric fire, shock, and/or malfunction.
 If the STATUS (Status) LED blinks orange, unplug the power cord since this is a
malfunction.
Deviation, such as keep connecting for a long time, could lead to fire.
 Handle the Ethernet Switch carefully so that fingers or hands may not be
damaged by twisted pair port or power cord hook block.
 When mounting the Ethernet Switch on a wall, mount it securely using wall
mount brackets (PN71053, optional) to prevent the Ethernet Switch from
falling due its weight and that of the connection cables.
Injuries and/or malfunctions could be caused due to the Ethernet Switch falling, etc.
 Up to two Ethernet Switches can be connected. When connecting two
Ethernet Switches, use connection brackets and screws (for fixing the
connection brackets) supplied with 19-inch rack mount brackets (two coupled
units)( PN71052, optional) to securely fix the connection brackets to the
connection screw holes on the front and back panels, and then install the
Ethernet Switches. If the Ethernet Switch is not fixed securely, injuries and/or
malfunctions could be caused due to the Ethernet Switch falling, etc.
 Double pole / Neutral fusing
 This Ethernet Switch is to be periodically serviced in order to maintain its
performance.
Please assign a product administrator, and be sure to implement periodic mainte-
nance. When doing maintenance, check the inspection chart that is posted on our
website which has the requisite items listed on it.
4
WARNING
CAUTION