Part Names And Functions - Panasonic GA-AS48TPoE+ Installation Manual

2

Part Names and Functions

Front panel
Power cord hook block
Back panel
 Power port
Connect the supplied power cord to this port and connect the other end into an
electric outlet.
 Power cord hook block
If the supplied power cord is hanged to this block, the cord becomes hard to pull
out from the power port.
 Ground terminal
Connect the ground cable (AWG18: green/yellow) to the ground terminal screw.
 10BASE-T/100BASE-TX/1000BASE-T port (ports 1–50)
Connect 10BASE-T/100BASE-TX/1000BASE-T terminals, hubs, repeaters, bridges,
and Ethernet Switches.
Install the device so that the length of the twisted pair cables (CAT5e or above) will
be 100 m or less.
 PoE power supply ports (ports 1–48)
The port can supply PoE power conforming with IEEE802.3at. Connect a Powered
Device conforming with IEEE802.3at. Devices such as 10/100/1000BASE-T terminal,
hub, repeater, bridge, and Ethernet Switch can be connected to this port. Install the
device so that the length of twisted pair cable (Cat5e or above) becomes 100 m or
less.
10
10BASE-T/100BASE-TX/1000BASE-T port
Ground terminal
Power port
MAC Address label
Serial number label