GEM eSyStep 639 S0 Series Operating Instructions Manual page 46

12 Specific data IO-Link (pin 6)
12.4.9 Product ID
The product ID can be read out in ASCII format with the Product ID parameter.
Index Sub- Off- Access
Index set Rights
0x13 0 0 RO
12.4.10 Serial number
The serial number of the device can be read out with the Serial number parameter.
The serial number consists of an 8-digit completion confirmation number, a forward slash and a 4-digit index.
Index Sub- Off- Access
Index set Rights
0x15 0 0 RO
12.4.11 Hardware revision
The circuit boards' version can be read out with the Hardware revision parameter.
The hardware version is displayed with the 2-digit version number of the basic assembly and the 2-digit version number of the
OPEN/CLOSED or positioner assembly.
Index Sub- Off- Access
Index set Rights
0x16 0 0 RO
12.4.12 Firmware revision
The software version can be read out with the Firmware revision parameter.
Index Sub- Off- Access
Index set Rights
0x17 0 0 RO
12.4.13 Application specific tag
A text with 32 characters can be stored in the device with the Application specific tag parameter.
For example, installation location, function, installation date, etc.
Index Sub- Off- Access
Index set Rights
0x18 0 0 R/W
GEMÜ 639 eSyStep
Positioner (Code S0)
Length Index name
18 byte Product ID
Length Index name
13 bytes Serial number
Length Index name
10 bytes Hardware revision
Length Index name
21 byte Firmware revision
Length Index name
32 bytes Application
specific tag
Parameter
Parameter
Parameter
Parameter
Parameter
46 / 72
Type Values
StringT "eSyStep Positioner"
Type Values
StringT "XXXXXXXX/YYYY"
Type Values
StringT "Rev. XX/XX"
Type Values
StringT "V X.X.X.X"
Type Values
StringT „**************** "
www.gemu-group.com