Setting Up; Connecting The Power Supply; Switching The Unit On And Off - DCS LINA User Manual

Setting up

Connecting the power supply

Use the supplied power cable to connect your LINA Network DAC to the power supply.
1. At the rear of the unit, insert the power cable into the power socket.
2. Connect the plug to a power supply.

Switching the unit on and off

At the rear of the unit, there is a power rocker switch next to the power cable. There is also a
power button on the front panel.
To switch on the unit:
1. On the rear of the unit, press the power rocker switch to the I position.
2. On the front of the unit, press the Power button.
16