Connecting The Lina Range - DCS LINA User Manual

To switch off the unit:
• Press and hold the Power button until POWER OFF is displayed.
Using sleep mode
Sleep mode suspends the unit in its current state, but keeps it ready for quick use.
To enter sleep mode, briefly press the Power button.
•
The display turns off.
To exit sleep mode, press the Power button again.
•
To prevent screen burn-in of the display, switch the unit off or put it in sleep mode
when not in use.

Connecting the LINA range

To connect the LINA Network DAC, LINA Master Clock and LINA Headphone Amplifier together:
1. Position the LINA range.
2. Connect the LINA Network DAC to the LINA Headphone Amplifier.
3. Connect the LINA Master Clock to the LINA Network DAC.
1. Positioning the LINA range
You can position the units in one of the following ways:
• Place the units side by side.
• Stack the units vertically in the following order:
• LINA Headphone Amplifier at the bottom
• LINA Master Clock in the middle
• LINA Network DAC on top
To prevent overheating, we recommend that you leave some space around the units
to allow for ventilation.
17