DCS LINA User Manual page 44

Clocking
MQA
Frequency response (set
to Filter 1)
Residual noise (6V output
setting)
Upsampling
Spurious responses
L-R crosstalk
Line outputs
Shipping dimensions
Shipping weight
Product dimensions
Product weight
Power requirements
These specifications are subject to change without notice.
44
2x word clock input on 2x BNC connector:
• Accept standard word clocks at 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz,
176.4 kHz or 192 kHz.
• The data rate can be the same as the clock rate or an exact multiple
(0.25x, 0.5x, 1x, 2x, 4x, 8x) of the clock rate.
• Sensitive to TTL levels.
Full decoding and rendering of MQA data from the Network and the USB
Type-A inputs.
Final rendering of unfolded MQA data only from the other inputs.
Fs = 44.1 or 48 kS/s
Fs = 88.2 or 96 kS/s
Fs = 176.4 or 192 kS/s
Fs = 352.8 or 384 kS/s
DSD64
DSD128
16-bit data: Better than –96 dB0, 20 Hz - 20 kHz unweighted.
24-bit data: Better than –113 dB0, 20 Hz - 20 kHz unweighted.
Multi-stage DXD oversampling with switchable DSD upsampling (1-bit
2.822 or 3.07 MS/s).
Better than –105 dB0, 20 Hz - 20 kHz.
Better than –115 dB0, 20 Hz - 20 kHz.
1 stereo balanced pair on 2x 3-pin male XLR connectors (pin 2 = hot, pin 3
= cold). These outputs are electronically balanced and floating, the signal
balance ratio at 1 kHz is better than 40 dB. Output impedance is 3 Ω ,
maximum load is 600Ω (a 10 kΩ - 100 kΩ load is recommended).
1 stereo unbalanced pair on 2x RCA Phono connectors. Output impedance
is 52 Ω , maximum load is 600 Ω (a 10 kΩ - 100 kΩ load is recommended).
Output levels are 2V or 6V rms for a full-scale input, set in the menu.
320 mm (H) x 360 mm (W) x 530 mm (D)
10.3 kg
121.5 mm (H) x 220 mm (W) x 339 mm (D)
7.4 kg
90-120 V / 220-240 V, 50/60 Hz
Power consumption: 30 W
+/-0.1 dB, 10 Hz to 20 kHz
+/-0.1 dB, 10 Hz to 20 kHz
+/-0.1 dB, 10 Hz to 20 kHz
+/-0.1 dB, 10 Hz to 20 kHz
+/-0.1 dB, 10 Hz to 20 kHz
+/-0.1 dB, 10 Hz to 20 kHz
-3 dB @ >38 kHz
-3 dB @ >67 kHz
-3 dB @ >100 kHz
-3 dB @ >90 kHz
-3 dB @ >100 kHz