Step 2 - Setting Up The Usb Source; A Word About Music Playing Software; Selecting The Paganini Upsampler As Your Audio Output Device - DCS Paganini Upsampler User Manual

dCS Paganini Upsampler User Manual
STEP 2 – Setting up the USB source
The USB interface can be connected to a Windows
TM
Mac OSX (10.5.4 or later) systems or a sound server, running software to generate PCM data.
If you do not want to use a USB source, go to STEP 3.

A word about Music Playing Software

There are countless programs that can play music on Windows
Unfortunately, not all of them present the data completely unprocessed to the USB ports. For
example, Windows Media Player re-samples all data to 24 bits, albeit at the original sample rate,
whilst iTunes rate converts data as necessary to the output sample rate set in the OSX Audio set-up
panel.
With such a proliferation of playing software, and with updates being issued daily, it is impossible for
dCS to be fully up-to-date with the behaviour and performance of all programs. If you have questions
or problems, we would urge you to take them up with your software vendor. What we will say is that
different programs operate very differently and it is well worth finding out exactly how your particular
program processes the audio.
One particular problem that has been identified and is worthy of note, concerns the popular iTunes
program when running on Windows systems. The default output word length is 16 bits and must be
changed to 24 bits for correct operation. To do this, click on
Click on the tab of the Quicktime panel and select
Audio
section.

Selecting the Paganini Upsampler as your Audio Output device

Whichever program you are using to play your music, your computer may not automatically select
your Paganini Upsampler as the preferred playback device. You can correct this as follows :
Windows XP - Once you have connected the Paganini Upsampler and switched it on, go to
>
Control Panel Sounds and Audio
the drop down list in the
be the same as that of the file.
Windows Vista - Once you have connected the Paganini Upsampler and switched it on, go to
>
Control Panel Hardware and Sound
appears.
dCS Paganini
to be the same as that of the file.
Rate
TM
OSX - Once you have connected the Paganini Upsampler and switched it on, open Finder,
Mac
click on the tab and select Utilities. In the Utilities panel, select
Go
the in the Audio MIDI setup panel. Select
Audio Devices
Output. You can also set
System
results, set the
Sample Rate
For more detailed advice, please visit
to Computer Audio".
Go to STEP 3.
Filename: Paganini Upsampler Manual v1_1x.docx
devices. Click on the
Default device list. For best results, set the
Sound Playback
>
Sound
will appear in the list of available devices. For best results, set the
dCS Paganini
to be the same as that of the file.
www.dcsltd.co.uk/page/support
TM
Vista/ Windows
TM
PC and Apple Mac
Start
in the
24 bit
tab and select
Audio
and click on the
dCS Paganini
as the default output from the same panel. For best
Page 8
Software Issue 1.1x
March 2011
TM
7 or XP (SP2 or later) PC,
TM
OSX systems.
> > Quicktime.
Control Panel
field of the
Size Sound Out
dCS Paganini
Sample Rate
tab of the panel that
Playback
and click on
Audio MIDI Setup
from the drop down list in the
and download the "dCS Guide
English version
>
Start
from
to
>
Start
Sample