Adjusting The Wind Sensor Sensitivity; Clearing The Wind Sensor Memory; Vehicle Ignition Lock-Out - Dometic POWER AWNING PRO Installation And Operation Manual

Vehicle Ignition Lock-out

9 .2 Adjusting the Wind Sensor
Sensitivity
Once programmed, the sensitivity can be adjusted at
any time without reprogramming. The sensitivity of the
wind sensor can be set from 1 (most sensitive) to 9 (least
sensitive) with the sensor dial. Settings 0 and 5 are for
programming only and are not active settings.
9 .3 Clearing the Wind Sensor
Memory
Step Operation
1
Remove the battery
cover from the back of
the remote.
3
Press the Left P2
button one time.
3
Press the Stop button
one time.
4
Press the Left P2
button one time.
12
Audible Awning
Alert Movement
None None
None None
None None
None None
Wireless Remote Control/Receiver & Wind Sensor
10 Vehicle Ignition Lock-out
When a motorized RV's ignition is in the ACC, ON, or
START position, a functioning receiver will automatically
retract/lock/cut power to the awning.
I For motorized RVs only: Make sure the awning
automatically closes when starting the RV.
When the motorized RV's ignition is in the OFF position,
the awning is unlocked and will operate normally.
q
ON
w
ON
10 Vehicle Ignition Lock-out
Ignition ON
q
Ignition OFF
w
EN