Advertisement
Quick Links
THIS QUICK START GUIDE IS INTENDED AS A GUIDE ONLY AND IS NOT INTENDED TO PROVIDE ALL INFORMATION
AND WARNINGS RELATED TO THE PRODUCT. REFER TO YOUR OPERATING AND INSTRUCTION MANUALS FOR
ADDITIONAL IMPORTANT INFORMATION AND WARNINGS, INCLUDING ADDITIONAL SAFETY WARNINGS.
Model
Power Awning Pro
Complete each programming step within four seconds of the previous step to keep the receiver in pairing mode.
Step
1
2
Press Left P2 Button x2
3
1
Press Up Button x1
4
2
Press Left P2 Button x1
5
2
Press Up Button x1
6
2
Press Down Button x1
When using on 9500 awning, press the
1
Steps 4-7 are only applicable to the 9100 awning series.
2
Revision A Form No. 3317464.000 05/22 | ©2022 Dometic Corporation
3316518.XXX, 3316519.XXX, 33117114.XXX, 3317115.XXX, 3316554.XXX, 3316520.XXX
Operation
Turn Power On
DOWN button at step 3 instead of the
Programming
Quick Start Guide
For Part Numbers
Audible Alert
Beep x1
Beep x2
Beep x4
Beep x1
Beep x1
None
UP button.
Awning Movement
None
None
Awning Jogs
Awning Jogs
None
None
Advertisement
Related Manuals for Dometic 3316518 Series
Summary of Contents for Dometic 3316518 Series
- Page 1 Press Down Button x1 When using on 9500 awning, press the DOWN button at step 3 instead of the UP button. Steps 4-7 are only applicable to the 9100 awning series. Revision A Form No. 3317464.000 05/22 | ©2022 Dometic Corporation...
- Page 2 Step Operation Audible Alert Awning Movement Awning Jogs Beep x3 Press Left P2 Button x1 None None Set Sensor Dial to “0” Beep x1 Press Left P2 Button x1 Awning Jogs None Beep x1 Press Left P2 Button x1 Press Programming Button x1 Awning Jogs Beep x1/Beep x5 None...