Table of Contents
Advertisement
Appendix
Optional settings*
Output signal ranges
Temperature ranges
Pressure ranges
Functions
Digital output
Resolution
Accuracies (for signal
range)
Switch
Max. current load
Compatibility of material
PH range
* Sensors are delivered with standard settings unless indicated
differently on the calibration certificate or delivery information!
9.2 Wiring configuration
Fig. 9.1: Tensiometer connection scheme
(change with tensioLINK)
0 ...1 V, 0 ... 2 V or 0 ... 5 V
0 ...1 V, 0 ... 2 V or 0 ... 5 V
+100 ... -100 kPa, +200 ... -200 kPa,
0 ... -100 kPa or +10 ...-90 kPa
Filling status (standard) or threshold value
for pressure, temperature, supply voltage
16 bit
±0,5 mV (0...1 V); ±2 mV (0...2 V) or
±5 mV (0...5 V)
high-resistance, max. burden 50 mA;
opened (0 V) or closed (supply voltage)
250 mA
pH 3 ... pH 10; avoid contact with
substances that harm silicon, fluoride silicon,
EPDM, PMMA, polyetherimid
49/58
Advertisement
Table of Contents
