Description of the T8
2.3.1 tensioLINK
To use the serial interface the tensioLINK
RS485 allows a robust
and cost effective bus
linkage of sensors with
cables of up to a few
kilometers. Data loggers
with RS485 interface can
directly
read
Please contact UMS for a
description of the data
protocol.
2.3.2 SDI12
Additionally a SDI12 interface is integrated for connection to SDI12
systems. The SDI12 interface has to be activated via tensioVIEW
Then, one of the 2 analog outputs is used as the SDI12 data line.
®
sensors.
14/58
®
USB converter with
Windows
®
tensioVIEW
is required.
®
tensioLINK
is
based and used for all
functions,
for
online
readings,
uploading
stored
and for configuration of
the T8.
software
RS485
taking
for
data
®
.