T8 configuration with tensioVIEW®
4.2.2 Current readings
Enter the interval parameters and press "Start" to display the current
readings.
4.2.3 Stored readings
Open the menu "Stored readings" to upload the data from a T8 (if
logging had been activated in the logger menu)
4.2.4 Configuration of a device
Select the register "Configuration" for viewing and changing the
programmed settings of the device.
Depending on the authorization status, only parameters that can be
edited are shown. To store it in the device. a changed parameter has
to be sent to the device by pressing the "Upload" button. A message
notifying about the successful configuration will be displayed.
Configuration changes are effective immediately. Tensiometers for
example will re-start just as if they were connected to power.
4.3 Configuration settings for T8
Those settings which are editable only for Power users are marked
with an asterisk *.
Parameters with related functions are bundled in one folder.
27/58