Table of Contents
Advertisement
T8 configuration with tensioVIEW®
Figure 4.4: Configuration menu: sensor measurements
Analog Outputs (DAC)
DACA active
Turns on the analog output 1 (standard use pressure)
DACB active
Turns on the analog output 2 (standard use temperature)
Associate reading DACA
A sensor reading can be associated to analog output 1. Standard for
analog output 1 is pressure.
Associate reading DACB
A sensor reading can be associated to analog output 2. Standard for
analog output 2 is temperature.
Associate depth DACA
For multilevel probes the DACA reading can be associated to a
certain depth. Then, tensioLINK will take readings using the same
31/58
Advertisement
Table of Contents
