Set Up Receiver; Set Up The Dexcom One Optional Receiver - Dexcom ONE Start Here Manual

Set up receiver

Step 1: Set up the optional
Dexcom ONE receiver
1. Press the Select button for 3-5 seconds to turn
on receiver.
2. Use buttons to navigate. The screen will tell you
which button to use.
Scroll up
Go back
3. Follow onscreen instructions to set up receiver,
including instructions to turn on alerts.
No glucose alerts unless you turn them on .
Turn on alerts when prompted to get glucose and
system alerts after sensor warmup is complete.
During setup, the receiver will prompt you to:
Enter the transmitter serial number (SN).
Find the SN on the transmitter
Select button
Back Save
or the transmitter box.
Enter the sensor code from the
sensor you are inserting. Do not
use the code from a different
sensor.
Sensor code is on the applicator.
9
Select
Scroll down