Changing Bios Settings After Attaching The Adapter - NEC 1000BASE-T Manual

N8403-012 1000BASE-T Adapter (2ch)
4.2

Changing BIOS settings after attaching the adapter

When you have attached the adapter to CPU blade, you have to change a part of BIOS settings.
Follow the steps below.
1. Turn on the CPU blade.
2. Press F2 key on the POST(Power On Self Test) to change the BIOS settings.
You see a screen like:
Main Advanced
System time :
System Date :
Processor Settings
F1 Help
Esc Exit
3. Press arrow keys (←/→) to select [Advanced] on the menu.
Main Advanced
Memory Configuration
PCI Configuration
Peripheral Configuration
Advanced Chipset Control
Reset Configuration Data:
NumLock:
Memory/Processor Error
F1 Help
Esc Exit
PhoenixBIOS Setup Utility
Security Server
[13:58:43]
[06/08/2004]
Select Item -/+ Change Values
Select Menu Enter Select
PhoenixBIOS Setup Utility
Security Server
[No]
[Off]
[Boot]
Select Item -/+ Change Values
Select Menu Enter Select
Boot Exit
Item Specific Help
F1 Setup Defaults
Sub-Menu F10 Save and Exit
Boot Exit
Item Specific Help
Additional setup
menus to configure
PCI devices.
F1 Setup Defaults
Sub-Menu F10 Save and Exit
45
- -
English Edition(英語版)