NEC 1000BASE-T Manual page 84

English Edition(英語版)
4.5.6 Initial diagnosis of adapter (Recommended)
It is recommended to do initial diagnosis for your adapter by Intel
Intel PROSet (how to start the diagnosis is all the same no matter how you installed it).
®
1.
Double-click [Intel
is displayed.
2.
Click [Diagnostics] tab.
3.
Click [Run Tests].
4.
You see a message. Click [Yes].
The diagnostics test will start.
5.
If "Pass/Fail" field is "1／0" on the right of the test items, the adapter is normal.
If "Pass/Fail" reads "0/1", go to Chapter 6 "Troubleshooting" on page 73to check again.
If "Pass/Fail" reads "0/1" again even after rechecking, contact your sales agent.
Before you start the initial diagnosis, make sure that the
adapter and link partner (such as switching hub) are
connected with a cable. If not, or if the link partner is
powered off, test result will be "failed."
PROSet] icon in [Control Panel] window. [Intel
®
-
N8403-012 1000BASE-T Adapter(2ch)
68
-
PROSet after you installed
®
PROSet] dialog box
®