Windows Server 2003; Test The Adapter - NEC 1000BASE-T Manual

English Edition(英語版)
Verify if the adapter LEDs are on or off.
N8403-012 adapter has LEDs around LAN port. You can see there if the link is established,
or how busy the traffic is.
LED statuses and their meanings are listed below.
ACT/LNK
SPEED
ACT/LNK
SPEED
6.2

Test the adapter

By installing this adapter's driver and Intel
test.
* For how to install Intel
adapter" on page 44.
To run on Windows 2000
On servers where Windows 2000
PROSet icon on [Control Panel] to run Intel
information are available from [Help] menu on Intel
LED Status
Lit
ACT/ Blinking or lit
LNK
Off
Lit green
SPEED
Lit orange
Off
PROSet, see Chapter 4 "Installing driver and setting up
®

/Windows Server 2003

®
/Windows Server 2003
®
Unless the adapter and link partner are connected with a twisted pair
cable, network diagnostics always results in "failed". Verify the adapter
and link partner are connected with a twisted pair cable before running
the diagnostics test
-
N8403-012 1000BASE-T Adapter(2ch)
Properly accessing the link partner. (Link
established )
Indicates that data is being sent/received.
Blinking interval varies depending on the
traffic intensity.
Not properly accessing the link partner.
(Link not established)
Working in 1000 Mbps
Working in 100 Mbps
Working in 10 Mbps
PROSet, you can run the adapter self diagnostic
®
®
is installed, double-click Intel
®
PROSet. How to start the diagnosis and other
®
PROSet window.
®
74
-
Meaning
®