NEC 1000BASE-T Manual page 10

This equipment is not intended for use in controlling or use with facilities
or systems where human lives are at stake or high reliability is required,
including medical devices or nuclear, aerospace, transportation, and
traffic control facilities. NEC assumes no liability for any accidents or
damage to physical devices resulting from the use of this equipment in
Prohibition
such systems or facilities.
Do not disassemble, repair or alter this N8403-012 adapter if you are
not a certified maintenance engineer. Otherwise, there is a risk of fire,
injury or electric shock.
Avoid exposure to water when you clean up this product. Otherwise,
there is a risk of electric shock. If anything goes wrong with this
product, contact your sales agent.
Do not use this product if the power cord of server is insecurely plugged.
Plug the power cord properly. Otherwise, there is a risk of a fire or
electric shock due to short-circuit or heating.
Do not leave or continue to use this equipment if anything seems
defective or abnormal.
Otherwise, there is a risk of a fire or current leakage.
If this equipment emits smoke, odor, or noise, or shows any other
abnormal symptom, immediately turn off the POWER switch of server,
unplug the cord and contact your sales agent.
N8403-012
Warning Observe fully.
- vi -
1000BASE-T 接続ボード(2ch)
1000BASE-T Adapter(2ch)