Table of Contents
Advertisement
2.1. Bracket Replacement
If you have a low-profile computer cabinet, replace the original full-height (standard) bracket with the low-profile
(short) bracket supplied in the product package.
IMPORTANT:
2.2. Adapter installation
IMPORTANT:
1.
Verify that the system is powered down and unplug the power cord.
IMPORTANT:
2.
See the User's Guide of the Server, and Install the adapter.
NOTE: Please check whether this product can be mounted in the slot of a server.
Remove a module or a slot cover from the SFP slot of this product before
exchanging brackets.
Remove a module or a slot cover from the SFP slot of this product before
exchanging brackets.
When the system is up, please turn the power off after shutdown process on the
OS.
1. Remove screw using a screwdriver.
2. Slide the bracket away from the adapter.
3. Prepare proper bracket
Full-Height(Standard)
4. Attach the new bracket to the adapter
5. Attach the screws you removed in step 1
17
Low-Profile(Short)
Advertisement
Table of Contents
