Table of Contents
Advertisement
Keystone OM9 - EPI2 PrOfIbus DPV1 IntErfacE
InstallatIon & MaIntenance InstructIons
4 installation
to assemble the OM9 into the f02-EPI2 actuator, proceed as follows:
• Ensure that all the parts received with the OM9 are available as described in paragraph Optional
kits
• Using paragraph Optional kits, select only mechanical parts (screws and spacers) depending on
actuator models
• Gather the right tools for the assembly and for setting the actuator controls.
fIGurE 5
fIGurE 6
follow one of the following assembling procedures depending on actuator model.
• With an Allen wrench of 5 mm unscrew the cover screws (Figure 5).
• Remove the actuator cover (Figure 6).
3
Advertisement
Table of Contents
