19. ETHERNET LINK CONFIGURATION
Connect CP 545 to PC via red Ethernet cable HL545-2.
Configure the Ethernet configuration on your CP 545 (menu:
Validate the IP address, or change it if necessary (we recommend that you keep the default value at
192.168.001.050).
Note: if you are connecting several CP 545's together via Ethernet, it is imperative to set unique IP
addresses for each unit.
Example:
If your PC is already connected to a network server (LAN), its IP address is defined automatically. You
should th/disconnect from the LAN and configure a special IP address for this application.
19.1. Configuration of your PC IP address
Select the program
connection
(Start
We suggest that you create a short cut
from your desk top to simplify the
access to the LAN.
Select
Select
Choose
Again, select
TAG Heuer Timing
CP 545 # 1
IP: 192.168.001.50
CP 545 # 2
IP: 192.168.001.51
Etc...
Network
Setting
Control
Local Area Connexion
Properties
Internet Protocol TCP/IP
Properties
Parameters
Panel)
Ethernet
ON)
Page 40 / 49