Rear Connectors - TAG Heuer CHRONOPRINTER 545 User Manual

3. Rear Connectors

INPUT Inputs for timing impulses.
1 to 4 Working contacts without potential (short circuit or op/collector)
Ex: Manual contactor (HL18), photocells (HL2-31 / HL2-35), Start Gates (H7-1 / HL7-
3), radio receiver (HL610, HL620 etc.)
Respect the correct polarity!
POWER For an external power supply.
HL545-1 adaptor (110-220Vac / 12 Vdc) or 12Vdc batteries via HL520-17 connection
cable.
Bi-directional communication with PC.
USB
Upgrade to the latest firmware for CP 545
Baud rate automatic
Note: The USB port is not suitable for transmitting data to LED display or modem
RS232 Bi-directional communication with a PC (ONLINE or OFF-LINE) with selectable baud
rates (2400 / 4800 / 9600 Bds (default) and 32k or 56k Bds)
Upgrade of the new software for CP 545
Timing data transfer from one CP 545 to another.
With "Display Mode", this allows standard communication with TAG Heuer or Alge
displays boards
ETHERNET Bidirectional communication with a PC or a Network (LAN) with other CP 545, PC
display board or printer.
TAG Heuer Timing Page 5 / 49