Special Characters Memorized, Printed And Sent To The Pc; Special Function: Reset Cp 545 - TAG Heuer CHRONOPRINTER 545 User Manual

IMPORTANT
The CP 545 will accept multiple times of the same competitor N° at the start and at the finish. The
times tak/into account in the ranking are the last one's recorded.
With each new start or finish, the proceeding times are automatically unassigned.
It's strongly recommended to identify or to cancel these times as soon as possible. This action
will simplify your timekeeping.
NOTE
This does not apply in the
for later analysis.
It is highly recommended to identify or delete all times not identified as soon as possible.

10. Special characters memorized, printed and sent to the PC

–
+
=
C
#

11. Special function: RESET CP 545

A general RESET
For this operation use a small unfolded paper clip or a needle.
WARNING
After a RESET, the memory is cleared and all parameters are restored.
To achieve a RESET, the CP 545 batteries should have a good life or alternatively connect the external
power supply. The
TAG Heuer Timing
TRAINING
Wh/a time is unassigned (false start, inter or finish)
Any time modified through a manipulation of start number
Any time inserted manually through INSERT TIME (Menu)
Any time repeated through DUPLICATE (Menu)
Any time cancelled through N° + R + 0 or after a DNF or DSQ
Any Start or Finish time of a forerunner (
can be achieved by pushing the mini switch located below the battery cover RESET.
RESET is available with CP 545
mode, whereby several runs for a competitor can be memorised
+ N°)
ON or OFF.
Page 23 / 49