TAG Heuer Chronoprinter 540 User Manual
  1. Manuals
  2. Brands
  3. TAG Heuer Manuals
  4. Printer
  5. Chronoprinter 540
  6. User manual

TAG Heuer Chronoprinter 540 User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

CHRONOPRINTER 540

User Manual

Version 11/2013
TAG Heuer Timing
Page 1 / 44

Advertisement

Table of Contents
loading

Related Manuals for TAG Heuer Chronoprinter 540

Summary of Contents for TAG Heuer Chronoprinter 540

  • Page 1: User Manual

    CHRONOPRINTER 540 User Manual Version 11/2013 TAG Heuer Timing Page 1 / 44...

  • Page 2: Table Of Contents

    19. ETHERNET LINK CONFIGURATION 19.1. Configuration of your PC IP address 19.2. In SKI PRO, MSPORT PRO etc. 19.3. Ethernet connection test : 20. Technical specifications 21. Accessories 22. Firmware JUMPING – V.CJ TAG Heuer Timing Page 2 / 44...

  • Page 3: The Keyboard

    Inputs are blocked when a black bar is shown on the LCD display Warning The manual timing keys (1 to 4) do not guarantee timing precision. Only two simultaneous impulses can be processed at a time from the manual keys TAG Heuer Timing Page 3 / 44...

  • Page 4: Rear Connectors

    (2400 / 4800 / 9600 Bds (default) and 32k or 56k Bds) Upgrade of the new software for CP540 Timing data transfer from one CP540 to another. With “Display Mode”, this allows standard communication with TAG Heuer or Alge displays boards ETHERNET Bidirectional communication with a PC or a Network (LAN) with other CP540, PC display board or printer.

  • Page 5: Quick Operation Guide

    3. Quick operation guide The exceptional performance of Chronoprinter CP540 is guaranteed with its simplicity of use, the hallmark of TAG Heuer timing philosophy 3.1. Battery installation & replacement To open the battery cover, use your thumbs to firmly push it in the direction of the arrow.
  • Page 6 The CP540 provides a visual (on the LCD) and audio alarm if an external input remains in short-circuit. This feature allows you to observe the status of TAG Heuer’s new “direct- response” photocells (HL2-31 & HL2-35 – serial number up to 7000) and allows the timekeeper to instantly determine if a photocell is out of alignment.

  • Page 7: Start-Up Menu Guide & Flow Char

    Km / h Start - Input N° Miles / h Finish - Input N° Noeuds Distance Printer Yes / No Download To Printer List of runs To PC List of runs To Chrono RS232 TAG Heuer Timing Page 7 / 44...
  • Page 8 TAG Heuer Timing Page 8 / 44...
  • Page 9 Advertising 1...16 2'400 Bds Running Time ALGE Display 9'600 Bds Time of Day 9'600 Bds Ctrl Flux Blank the Board Ethernet ON / OFF by default: 192.168.1.50 English / Français Language Print Setting TAG Heuer Timing Page 9 / 44...

  • Page 10: Menu Description Before Opening Up A New Run

    General ranking from the addition of runs 02 and 01 (calls it 02 T) ► Ranking of run 02 (added to run 01) ► Ranking of only run 01 Or with 2 run added (ex 03 + 01). First select one of the 2 runs. TAG Heuer Timing Page 10 / 44...

  • Page 11: Timing Modes

    Sequential recording of time-of-Day on 4 or 8 channels (if 2 CP540 are connected together with RS232 connection) directly to an external PC. Uses bi-directional communication with a PC running TAG Heuer or Split Second (USSA / CLUB / NASTAR) software, where it is possible to print all net times, current ranking and even the competitor name and affiliation directly on the CP540 printer.

  • Page 12: Parameters

    The minimum lock-out time of 0.01 sec should not be used with any mechanical triggering device (bounce may cause several impulses received). ATTENTION For your convenience, default lock times are pre-programmed for each timing mode, and can be modified by you. TAG Heuer Timing Page 12 / 44...

  • Page 13: Numbering (Except Ptb Seq)

    It is recommended to set the value at 0% during daylight conditions to guarantee the best internal battery life. 5.2.7. LCD Delay ▲ ▼ LCD duration of the currently displayed information. Adjust with Plus / Less, ◄┘ then validate (5 seconds is the default setting) TAG Heuer Timing Page 13 / 44...

  • Page 14: Beep

    Baud rate is selectable: 2'400 / 9'600 / 38’400 / 57'600. 9'600 Bds is the default setting. To Display • Running Time on the TAG Heuer display (HL960 / HL 970 / HL990 / HL965 / HL980) and other display as Alge. • Running Time of Day of the CP540 •...

  • Page 15: Ethernet

    It must be turned ON each time you power up the Chronoprinter. 5.2.11. Language The CP540 is programmed in English and French. German and Italian languages are available for download from our website: www.tagheuer-timing.com TAG Heuer Timing Page 15 / 44...

  • Page 16: Speed

    - To Chrono RS232: to download the time from a run from a Chronoprinter to another one. It is important to set correctly the Input (see chapter 5.2.4) TAG Heuer Timing Page 16 / 44...

  • Page 17: Keyboard Shortcuts

    Note: Normally a disqualification is the function of a race jury. However, use this function if no race jury exists and you desire to remove the athlete from the ranking due to disqualification. TAG Heuer Timing Page 17 / 44...

  • Page 18: Special Characters Memorized, Printed And Sent To The Pc

    After a RESET, the memory is cleared and all parameters are restored. To achieve a RESET, the CP540 batteries should have a good life or alternatively connect the external power supply. The RESET is available with CP 540 OFF. TAG Heuer Timing Page 18 / 44...

  • Page 19: To Open A New Run (Added Or Not To A Previous Run)

    9. To open a new run (added or not to a previous run) TAG Heuer Timing Page 19 / 44...

  • Page 20: Addition Of Runs

    BIBO will take in account these entire competitors N°’s. + ◄┘) 9.3. Ranking General ranking of the actual run. 9.4. Rank a Run Ranking of the actual run or proceeding runs. TAG Heuer Timing Page 20 / 44...

  • Page 21: The Existing Menus When A Run Is Opened

    • • • • • • • • • • • • • • • • • • • • ⇒ ⇒ ⇒ ⇒ Download Copy all times from the Run selected into a new run TAG Heuer Timing Page 21 / 44...

  • Page 22: Description Of The Menu (When A Run Is Open)

    Download to PC , to Printer or to Chrono. Refer to the main menu. ⇒ WARNING Please refer you to the chapter 5.2.5 (Inputs Status) to setup the received CP540 from another CP540. TAG Heuer Timing Page 22 / 44...

  • Page 23: Mass Start Or Group Start (Grp)

    If one or more competitor numbers are starting at the same time, select Duplicate and follow the steps as described above. WARNING The defined start times must be referenced with the time-of-day of your CP540 (Synchro). TAG Heuer Timing Page 23 / 44...

  • Page 24: Changing The Paper Roll

    Rotate the paper roll to loosen a little bit of the paper. Extract 3 to 4 cm of paper. Firmly hold the unrolled paper with your index finger and thumb on each side and pull it vertically out. TAG Heuer Timing Page 24 / 44...

  • Page 25: Autonomy / Batteries

    It is recommended to set the back light of the LCD at 0 for a longer autonomy. IMPORTANT It is strongly recommended that you remove the battery if you are not using your Chronoprinter 540. If using the Docking station « HL540-BATT ». You have the possibility to extend the autonomy. TAG Heuer Timing...

  • Page 26: Information About Timing Modes

    Each Timing Mode has parameters that are memorized (default) based on those given during the last timing session. Each Timing Mode proposes the main parameters memorized by default or used during the last timing session. Example: CHRONOPRINTER 540 PTB SEQUENTIAL Mode N°0003 V.A-08 DATE <DMY> 04.12.07 HOURS <HMS>...
  • Page 27 Sequential N°s for each input are sent to PC • SPLIT / LAP 4 active inputs with automatic (ascending) competitor N°. • This mode allows independent timing of 4 competitors using 4 inputs. TAG Heuer Timing Page 27 / 44...

  • Page 28: Example Of Timekeeping Sessions

    62.582 Km/h 15:26:22.802 15:29:50.241 15:29:50.750 4 speeds are set in the PTB, NET TIME, START-FINISH, 15:29:51.210 TRAINING and SPLIT mode 1 speed by course track in PARALLEL SEQ. Speed 1 78.311 Km/h 15:29:51.720 TAG Heuer Timing Page 28 / 44...

  • Page 29: Net Time Mode

    13:35:28.364 13:35:29.177 Ranking of the 1 13:35:28.364 <1> 00:01:34.18 13:35:26.177 <1> 00:01:00.68 **************************** RANKING RUN N° 00:01:00.68 00:01:01.11 Le N°8 left. 00:01:09.39 He gives up (N°8 + 0) 00:01:10.56 00:01:14.39 00:01:34.18 **************************** TAG Heuer Timing Page 29 / 44...
  • Page 30 RUN N° 02+01 00:01:33.41 00:01:35.33 General ranking with addition of run 1 00:01:38.77 and 2 00:01:46.21 00:01:51.42 00:02:12.96 **************************** **************************** Ranking Run 2 RANKING RUN N° 2 00:01:29.38 00:01:32.30 00:01:34.65 00:01:35.65 00:01:37.03 00:02:38.78 **************************** TAG Heuer Timing Page 30 / 44...

  • Page 31: Parallel Sequential Mode

    <3> 00:01:19.65 **************************** RANKING RUN N° 01 Blue course competitor ranking -> BLUE 00:01:17.97 00:01:18.64 00:01:19.65 Red course competitor ranking -> 00:01:16.71 00:01:17.88 00:01:18.13 **************************** Close the run (menu) RUN N° 01 CLOSED TAG Heuer Timing Page 31 / 44...
  • Page 32 00:01:16.05 00:01:13.09 00:01:15.01 00:01:16.05 00:01:16.80 General ranking with Run 1 and 2 added 00:01:16.97 00:01:17.51 **************************** RANKING RUN N° 02 -> BLUE Run 2 ranking 00:01:16.38 00:01:17.92 00:01:19.63 -> 00:01:15.36 00:01:18.16 00:01:18.13 **************************** TAG Heuer Timing Page 32 / 44...

  • Page 33: Parallel Differential Mode

    For the run 2, WITHOUT PENALTY, the differences during run 1 will be implemented for each N° competitors. 0,000 for the winner of the 1st run and 0,698 for example, for the competitor who faces the winner on the opposite track. TAG Heuer Timing Page 33 / 44...

  • Page 34: Training Mode

    This timing mode requires a minimal amount of manual input N° if the competitor N° proposed on the Start is incorrect N° if competitor aborts the run Example: N°3 starts and aborts the run after the 1 intermediate TAG Heuer Timing Page 34 / 44...

  • Page 35: Download A New Version Of Software And/Or Language

    11. The new software version will be printed (if the Printer is in ON) 18. RS232 and Ethernet Protocol For details of the communication protocol, please refer to the document: THCOM08. Please contact us directly at : info@tagheuer-timing.com TAG Heuer Timing Page 35 / 44...

  • Page 36: Ethernet Link Configuration

    We suggest that you create a short cut from your desk top to simplify the access to the LAN. • Select Local Area Connexion • Select Properties • Choose Internet Protocol TCP/IP • Again, select Properties TAG Heuer Timing Page 36 / 44...

  • Page 37: In Ski Pro, Msport Pro Etc

    If not, to retrieve to the original setting, please select Obtain an IP address automatically 19.2. In SKI PRO, MSPORT PRO etc. • Select the type of Timing Devices and enter the IP address of your CP 540. TAG Heuer Timing Page 37 / 44...

  • Page 38: Ethernet Connection Test

    CP 540 PING 192.168.1.50 • If the link is not working, please check carefully the following : a) IP address of your PC b) IP address of your CP 540 c) Connexion TAG Heuer Timing Page 38 / 44...

  • Page 39: Technical Specifications

    CP540 without transport case: 860g (with battery set and 1 paper roll) CP540 with transport case and power supply: 1'800g PLEASE NOTE Some technical specifications could be modified or improved without any advice. This is to guarantee the evolution of our devices and accessories. TAG Heuer Timing Page 39 / 44...

  • Page 40: Accessories

    This docking station is recommended for an systems in a difficult environment. absolute precision and professional timing. Include • Include: Internal battery • • Internal battery GPS module • • GPS module GSM module TAG Heuer Timing Page 40 / 44...
  • Page 41 Radio Data / Voice HL 680 (5W) In collaboration with ICOM France, the specialist in radio telecommunication, TAG Heuer has developed a new radio system combining the traditional voice communication with the protocols dedicated specifically in our Chronoprinter 540, allowing transmission under the best conditions, all timing information.
  • Page 42 Matrix Display HL 970 The new TAG Heuer matrix LED display HL 970 will convince anyone considering multi-purpose uses with multiple parameter settings. The concept proposed by TAG Heuer enables the visual representation of timing information or alternatively advertising and information messages (logo & text).

  • Page 43: Firmware Jumping - V.cj

    With Start Count Down (Input 3), Start Phase 1 (Input 1), Jump-Off (Input 2), Finish Phase 2 (Input 4) These two modes allow you to time in Stand-Alone a Jumping Race (with or without Jump-Off) directly with our Chronoprinter 540. With these modes, you will be able to add and remove Penalties, Stop/Restart, automatically calculate points penalties, time limit penalties (phase 1 or 2) and also automatically add Pause Penalties when they are required.
  • Page 44 TAG Heuer PROFESSIONAL TIMING 6A Louis-Joseph Chevrolet 2300 la Chaux-de-Fonds Switzerland Tel : 032 919 8000 Fax : 032 919 9026 info@tagheuer-timing.com www.tagheuer-timing.com TAG Heuer Timing Page 44 / 44...

Table of Contents