Printer Configuration - TAG Heuer HL 210 User Manual

5. Printer Configuration

The printer incorporates a number of configurable option, each of which has a number of setting.
5.1. To change the setting of any option, follow the procedure below:
1) Ensure the printer is OFF
2) Press and hold the Mode Button: 5 seconds. The Status light will flash 5 times to show that the
printer is in configuration mode. Release the Mode button
3) Press the Mode button the same number of time as the option that you wish to change
4) After a short delay, the Status Light will flash the same number of times as the option that you
have chosen. If you have made a mistake at this stage, simply wait: after a delay, the printer will
power-on without changing any options.
5) To proceed with configuration, press the Mode button the same number of time as the setting that
you wish to make
6) After a short delay, the Status light will flash the same number of times as the setting that you
have made
7) After a further delay, the printer will power ON with the new setting
Option Description
1 RS232 Protocole
2 RS232 Baud Rate
3 Flow Control
4 Font
5 Character Format
6 Print Denstity
7 Printer Currint
Print Format
8
9 Sleep/Wake up
TAGHeuer Timing
Setting n° Setting
Request specific to TAG Heuer Timing
1 115200
2 57600
4 19200
5 9600
7 2400
Other Under request at TAG Heuer Timing
Under request at TAG Heuer Timing
1 Arial 16 (24 characters / line)
2 Arial 12 (32 characters / line)
3 Arial 9 (42 characters / line)
4 Arial 8 (48 characters / line)
1 Normal
2 Double Width
3 Double Height
4 Double Width and Height
1 Lowest
4 Highest
1 Highest
4 Lowest
Standard paper, normal printing
1
2 Standard paper, upside down printing
3 Labels, Normal printing
Labels, upside down printing
4
1 Never sleeps
2 Off after 1 minutes
3 Off after 2 minutes
4 Off after 5 minutes
5 Off after 10 minutes
Page 5 / 8